2021年7月8日木曜日

本日のケンリックサウンド Today at Kenrick Sound (JBL 4301B, 4312MK2)

ケンリックサウンドの熊木です。本日のケンリックサウンドの様子を紹介いたします。
This is Kumaki from Kenrick Sound. I will post some of our recent works.


こちらは各作業が完了し、一度組み上がったJBL 4301Bです。今回施した作業は以下になります。
These are JBL 4301Bs that have been assembled to be tested. Below are the specific modifications we applied to these speakers.

【JBL 4301B レストア】
・キャビネット新品仕上げ
・JBL 116H クロスエッジ交換、センターキャップ交換交換
・JBL LE26 エッジ軟化処理、コーン紙着色
・Mundorf Mcap EVO SilverGold Oil コンデンサー
・Mundorf MResist Supreme 抵抗
・トランス式アッテネーター
・背面CMCタイプ大型金メッキ端子
・テフロン銀メッキ線配線交換

[ JBL 4301B restoration ]
*Speaker cabinet refinishing
*JBL 116H new cloth surrounds, new dustcaps
*JBL LE26 softening of the surrounds, cone recoloring
*Mundorf Mcap EVO SilverGold Oil capacitors
*Mundorf MResist Supreme resistors
*Transformer type attenuators
*CMC type Gold terminals
*Teflon silver plated wiring

代表の音チェックも済みましたので、後はスピーカーの周波数特性を測定して、アッテネータープレートを取り付けて完了です。
The sound check has been finished by our president, so we will test the frequency characteristics and then attach the foil cals in place.


この写真は新たに作製中のJBL 4312MK2 用スペシャルネットワークです。各パーツの接着や取付が完了しましたので、これから配線作業を進めていきます。
This is a photo of the custom crossovers for the JBL 4312MK2s we are building now.All of the parts and components have been placed, so I will start wiring them.


こちらが配線作業が完了した様子です。周波数特性を測定し、キャビネットへ組み込みます。
The wiring is finished. I will test the frequency characteristics, and then install them in to the cabinets.