2021年3月28日日曜日

最近のカスタムJBLスピーカーのネットワーク作業 Recent crossover works of JBL custom speakers

ケンリックサウンドの熊木です。
This is Kumaki from Kenrick Sound.

最近のネットワーク作業を紹介いたします。
I will post some of my recent crossover works.

こちらはD130+075用カスタムネットワークです。
These are custom crossovers for the D130+075 setup.


【D130+075用 ネットワーク使用パーツ】
・ファインメットカットコアコイル(高域フィルター用)
・Mundorf Mcap EVO SilverGold Oil コンデンサー
・Mundorf MResist Supreme 抵抗
・トランス式アッテネーター
・背面大型金メッキ端子
・4N 純銀単線配線

[ Components used for the D130+075 crossovers ]
*Fine met cut core inductors for high frequency filters
*Mundorf Mcap EVO SilverGold Oil capacitors
*Mundorf MResist Supreme resistors
*Transformer type attenuators
*Gold terminals
*4N pure solid silver wires

以下の写真はもう1ペア製作中の10th Anniversary 4351用ネットワークです。
Below is a photo of the crossovers for the next pair of 10th Anniversary 4351 speakers.

一旦ネットワークを組み上げたら周波数特性の測定を行います。その後、キャビネットに仮組し、各コイルやパーツの適正方向、適正位置を決めていきます。パーツごとの適正方向、適正位置は1つ1つの個体で異なりますので、同じモデルのスピーカーで同じ仕様のパーツであっても、毎回スピーカーに組み込み、音を聴きながらテストを行います。
Once they are assembled, I will test the frequency characteristics to make sure there are no mistakes. Then, we will assemble them in to the speaker cabinet to determine the best position and polarity of each component. Even if we are using components of the same specifications, the ideal positioning and polarity will differ one by one, so it is necessary to actually listen to the sound each time in order to make these decisions.